Bagasse / Biogas Fired Boiler
Descon LMW has been awarded 1 x 40 TPH, 60 barg(a), 500° C, high pressure Bagasse / Biogas Fired Boiler by M/S Unicol Limited. This is the first Solid Fuel Fired boiler with pin hole grate combustion system in Pakistan.  Descon’s scope covers Design, Fabrication, Supply, Erection/Installation and commissioning. The project shall be completed by October 2013.

0.6 MW Power Plant
Descon LMW has been awarded 1 x 0.6MW Power Plant by M/S Sapphire Textile Mills Limited. This is the first Power Plant awarded to LMW.  Our scope covers Design, Fabrication, Supply, electro-mechanical construction and commissioning. It also includes Waste Heat Recovery Boiler (WHRB), Steam Turbine, Cooling Tower, piping and allied equipments. The project is scheduled to be completed by November 2013.

Fire Tube Boiler
Descon LMW has been awarded 06 TPH, 10 Bar(g) Fire Tube Boiler by M/S Riaz Bottler. The scope covers Design, Fabrication, Supply, Erection/Installation and commissioning. The project shall be completed by mid June 2013.
Consultancy Services for 25 MW Co-generation Power Plant
Descon LMW has been awarded the Consultancy Engineering Services Project for implementing 25 MW Co-generation Power Plant by M/S Shahtaj Sugar Mills. Descon shall provide detailed engineering services, thermal design, preparation of heat and mass balance, preparation of schemes for steam and power cycle, preparation of steam turbine specification, detail plant layout, piping plan layout etc.

Rental Steam Solution
Descon LMW has introduced a unique service with the name of Rental Steam Solution to our clients. This service shall help to meet the immediate steam requirement of client. Initially Nestle Pakistan and Tripack has taken the benefit of this service and now LMW has been awarded the contract of this service by M/S Riaz Bottler to meet their steam requirement.

Solar Driven Corrosion Inhibitor Skid
Descon LMW has been awarded the project for the Design, fabrication and supply of Solar Driven Corrosion Inhibitor Skid for OMV GmBH. This is the first Solar Driven Corrosion Inhibitor Skid awarded to LMW. Alternate energy is the future energy resource. Award of this project will help us effectively tap new opportunities in the field of Alternate Energy. The project shall be completed by June 2013.

We are pleased to announce that Lahore Manufacturing Works (LMW) has been awarded the following projects:

1. 1 X 15 TPH, 10 bar(g), 184°C saturated steam, low pressure, coal/biomass fired boiler by M/S Yunus Textile Mills Limited. Our scope covers design, fabrication, supply, erection/installation and commissioning. This is the first Coal Fired Boiler project for Descon.

2. 1 X 135 TPH, 67 kg/cm², 485° C, bagasse fired boiler by M/S Shahtaj Sugar Mills Limited. The scope covers design, fabrication, supply, erection/installation and commissioning.

3. 1 X 16 TPH, 18 bar(g), 3 pass, wet back type, saturated steam, horizontal fire tube boiler by M/S Nestle Pakistan Limited. Our scope covers design, fabrication, supply, erection/installation and commissioning.

Keeping in view the current energy crisis and scarcity of conventional fuels, the dependency of industry on alternate fuels like Coal & Biomass has increased extensively. To cater to these requirements, Descon Engineering Ltd. and Jinan Boiler Group Co., Ltd have joined hands to offer technically and commercially viable solutions to clients in Pakistan. Both parties have signed a technical collaboration agreement for the manufacturing of solid fuel fired boilers using Circulating Fluidized Bed combustion technology. The complete boiler design will be provided by JBG while local manufacturing, installation and commissioning will be conducted by Descon in collaboration with Jinan. With this step forward, Descon stands committed to delivering customer-centered steam solutions on solid fuels.

Descon Engineering Limited started boiler manufacturing at its Lahore Manufacturing Works (LMW) in 1988. Since then, Descon boilers have maintained an outstanding growth in both domestic and regional markets achieving excellence in the fields of engineering, procurement, fabrication & commissioning to provide the most competitive and reliable turnkey solutions to its clients. 

To date, Descon has provided boilers to nearly all industrial sectors including fertilizer, oil & gas, chemical/petrochemical, power, cement, paper, textile, sugar, pharmaceutical and food sector utilizing various fuels. With more than 150 boilers and cumulative steam production of more than 5,000 tons per hour, Descon is committed to increase this number in the near future. Currently, Descon is capable of supplying direct fired boilers up to 290 TPH, 136 barg & 540°C and heat recovery steam generators behind gas turbines up to 270 MW.

Jinan Boiler Group Co., Ltd. (JBG) China, established in 1954, is the kernel subsidiary company 100% owned by Dragon Power Co., Ltd. which is the representative enterprise of the clean energy industry.

JBG is a globally-known Circulating Fluidized Boiler designer and supplier on coal and biomass fuels. With advanced technology and excellent quality service, CFB boiler products of JBG have gained major recognition not only in China, but in the international market as well. Majoring in the manufacture of medium and high pressure power boilers, JBG integrates the scientific research, manufacture, complete equipment supply, installation, maintenance, innovation and technology consultation of boilers.

JBG has sold more than 2,000 sets of 35t/h~650t/h CFB boiler, which takes up 50% of the total CFB boiler market in China. Part of CFB boilers have been exported into Mongolia, Pakistan, Thailand, Indonesia, India, Malaysia etc.

Descon makes the nation proud by commencing the first Independent Power Wind Project in Jhimpir, Sindh. This is the start of a green power revolution in Pakistan. The 50 MW project namely Fauji Fertilizer Energy Company Ltd is an endevour of Fauji Fertilizer Company Limited. Fauji Fertilizer Limited being one of the most progressive industrial groups has once again taken a lead in venturing and pioneering as a developer in the Green Energy Field. The proposed wind farm site is located in the south-eastern part of Pakistan between Hyderabad and Karachi, approximately 100 km inland from the coast in a semi-desert area. The nearest settlements are Jhimpir (2.5 km southeast) and Nooriabad (22 km north-west). This unique green power project promises to be environment friendly, with zero-carbon emissions, powering the nation towards a greener tomorrow.

Pakistan is a country with tremendous potential in the energy resources. It is not only blessed with the natural energy resources like Hydro Power and Natural Gas but also with thousands of Mega Watt potential for Wind Power Projects. It has a coastline of 1,050 km out of which only the potential of 250 km Sindh coastline has been evaluated. Wind energy and power transmission technologies are rapidly evolving to accommodate the impressive growth of wind power.

Descon and Nordex Germany were awarded the 50 MW wind power project on EPC (Engineering, Procurement, Construction) basis by FFCEL. Descon Engineering Ltd and Nordex Germany, EPC partners for this project are proud to be part of this first 50 MW Wind Power Project. Descon with its 3 decades’ experience is the only Pakistani company having the specialized resources to undertake such a unique project.  Wind energy is a blend of modern technology and engineering and the award of this project to Descon has strategically placed Descon as a leader in the development of Green Energy in Pakistan.

Moving the turbines was a challenging task; therefore a comprehensive transportation plan was engineered to move 1 complete set (to avoid double handling) at the installation site consisting of 3 Rotor Blades & 1 Nacelle on Multi-Axle Hydraulic Trailers, Hub on low bed trailer and containers on flat bed trailers. 38.5 m long blade has an overhang component for which a safety plan was also devised. All rigging gears and equipment was third party certified. A detailed, delivery inspection was carried out by QA/QC for damages and irregularities during onshore and offshore handling. The consignment of parts was placed according to the stacking plan at Port Passim, so that the components could be delivered as per the SEP (Site Erection Plan).

On 21st of January, 2012 Descon performed the first lift of 1.5 MW wind turbine. Sophisticated cranes perfectly equipped for the erection of wind turbines were acquired for the job. The cranes used are equipped with state-of-the-art electronic control systems, monitoring screens, wind speed indicators and radio transceivers for communication. This 1.5 MW Wind Turbine is supplied by Nordex Germany and all the other equipment including the tubular towers is manufactured at Descon Engineering Ltd Manufacturing works. This localization in manufacturing of Wind Towers has also embarked Descon Engineering Ltd and Pakistan in the field of Wind Energy worldwide.   

Descon as an EPC is providing services from project management to engineering and construction, with working with the same stringent standards as entailed in any project.

This project is the first of its kind in Pakistan and shall greatly contribute to the development of wind industry in the country where a substantial growth is expected in the coming future. There are huge opportunities in this market and Descon is determined to maintain a strong presence. This continued commitment has resulted in the signing of EPC contracts with other major investors like Fauji Foundation, Yunus Energy, Gul Ahmed Energy and Metro Wind Power.

To provide pressure equipment's quality fabrication solution, Descon Engineering FZE has just installed a dish head forming machine. Our dish head machine has the capacity to form dish heads of 4,000 mm diameter up to 40 mm thickness and is equipped with a press of 1,500 tons capacity and a manipulator of 12 tons.
Currently, the machine is successfully forming and delivering dish heads for one of our ongoing projects.

Nishat Mills Limited awarded the Electromechanical Construction of 6 MW Coal & Biomass based power project to Descon Engineering Ltd. This is the first of its kind in Pakistan being implemented. Descon is keen to participate in its development.

Descon Engineering Ltd is awarded the Civil Works of 48 MW CoGen Power Project of Lotte Pakistan PTA Limited. Core team has mobilized to the project site to complete the project within due timeline to further strengthen its ties with Lotte PTA.

We are pleased to announce the successful SAP implementation of IS-EC&O for the 1st time ever in Pakistan. Congratulations to DEL Project EDGE & PDIL teams for all the hard work, dedication & commitment in making this implementation possible. Credit goes to DEL ICT SAP team, who took this challenge and made this implementation successful.

EPC works for the Asphalt Blowing Unit for PARCO Mid Country Refinery was conferred to Descon Engineering Ltd in February 2011. Right now the project construction is going at smooth pace to achieve the completion in due time.

Descon Engineering Limited - Hyundai Engineering Consortium has been awarded the EPC works of upcoming 400 MW Uch Power Plant in Dera Murad Jamali. This is an extension of UCH Power. Gas Turbines are being supplied by GE. This EPC award of the project to Descon Engineering Ltd reflects the confidence of its clients in its capabilities. The project activities are in progress with the start of engineering design.

Descon Engineering Ltd is awarded the EPC works of 18 MW Ranolia Hydro Power Project. EPC is all set to deliver the best of its engineering practices.

Descon Engineering Ltd has been awarded the EPC works for the development of First Commercially Operative 49.5 MW Wind Power Project, which will be connected to National Grid at 132 KVA in Jhimpir Sindh. For this project, DEL has teamed up with Nordex S.E of Germany. This will be the first wind power project that will be developed by a Pakistani Company on EPC basis.

Mechanical Works for the Piping and steel structure fabrication and equipment erection in Borouge - 3 Poly Olefin Process Plant are awarded to Descon Engineering Ltd.

Complete Civil, Electrical & Instrumentation and Mechanical Construction works for the IGD Habshan Process Plant was awarded to Descon Engineering Ltd in December 2010. The construction of the project is in full swing and Descon is geared up to deliver its largest construction project well within due timeline.